Taco 1900 VFD pumps gently ramp-up and ramp-down operation to match system flow to actual heating and cooling demands, enhancing overall system efficiency. Typically, the payback period for installing VFD pumps in place of single-speed pumps is less than 12 months.
Our new 1900 VFD pumps, with single-phase or three-phase motors, are available in five basic models ranging in size from 1-1/2" x 1-1/2" to 2" x 2" with a flow range of 10 to 250 GPM, and head capability to 160 feet. Rear, pull-out design allows servicing of the pump without disturbing the piping.
Exclusively from Taco: The new 1900 VFD pumps may be optionally-equipped with Aegis™ shaft grounding rings to prevent electrical bearing fluting damage, an important feature not available from other pump manufacturers. The factory-installed rings safely divert harmful shaft voltages and bearing currents to ground with a "path of least resistance" to dramatically extend motor life.
Features of the Taco 1900 VFD pumps include:
Can be installed anywhere in the piping layout.
Self-supported by system piping; require no additional strapping or external support.
Can be mounted horizontally or vertically.
Permanently-sealed motor design with grease-lubricated ball bearings makes the 1900 virtually maintenance free.
Ceramic seals standard to meet a wide range of application requirements.
Taco Streamlines Revit File Handling With New CADworks BIMXchange
Engineers and specifiers who use Taco BIM objects for the Autodesk Revit® platform will find selecting and importing these files faster and more convenient with the CADworks BIMXchange application now available for download on the Taco website.
BIMXchange is a fast, reliable Revit content tool and a powerful accompaniment to Autodesk Seek®. It enables users to:
Quickly find Taco equipment within our library of indexed and seachable Revit content.
Import the selected files into design models in fewer steps than previously.
With its intuitive user interface, BIMXchange improves productivity by eliminating redundancy and increasing uptime and reliability for users.
The addition of BIMXchange to the Taco site, enhances Taco's technical support as well fulfilling customer requests for faster, more convenient handling of Revit files.
Taco AHR Expo Recap
Taco featured a wide variety of new systems, products and programs at the AHR Expo last month in Las Vegas. Whether or not you attended, you probably didn't see all of what we had to offer. But it's not too late.